Sale -22%

AUZKIN 60 Inches Tailgate Light Bar Double Row LED Light Strip Brake Running Turn Signal Reverse Tail Lights

(10 customer reviews)

Listed Price:
Sale Price: $27.99

You Save: $8.00

[Incredible Brightness]- AUZKIN led tail light apply 2835-SMD LED chip and Double-Row LED design, which makes the lumen output 200% brighter than normal Single-Row LED. AUZKIN led trailer lights can wake up everyone behind you and improve your own safety on the road.
[Waterproof IP67]- This tailgate light strip is made of durable rust-proof flexible aluminum substrate and fully sealed watertight silicone. With this advanced waterproof technology, the duration of our products can last up to incredible more than 50,000 hours. It’ ready to withstand rain, snow and other harsh weather.
[5 Functions]- Full functions makes your car stand out on the road. Support running, brake, turn signal, reverse light. Running light-All red LED light up(low beam mode); Brake light-All red LED light up(high beam mode); Rear left turn signal-Left red LED light up; Rear right turn signal-Right red LED light up; Reverse light-All white LED light up; Emergency strobe light-All red LED flash.
[Quick Installation]– No need to drill, it’s Plug and Play. AUZKIN LED light bar can be attached on any truck with at least 60 inches tailgate clearance. It mounts very easily using special automotive adhesive and the tough-as nails 50lb-rated Automotive adhesive will never fall off. Then connect the male 4-pin flat trailer connector.
[Wide Application]– Universal use. This flexible LED strip is suitable for most DC 10V-16V cars and vehicles, can fit different types of trailers trucks, jeep, ATV, UTV, etc..

SKU: B07MH4YCHZ Category: Tag:


AUZKIN 60 Inches Tailgate Light Bar Double Row LED Light Strip Brake Running Turn Signal Reverse Tail Lights for Trucks Trailer Pickup Car RV Van Jeep Towing Vehicle, Red White, No Drill

AUZKIN 60 Inches Tailgate Light Bar Double Row LED Light Strip

AUZKIN 60 Inches Tailgate Light Bar

AUZKIN 60 Inches Tailgate Light Bar Double Row LED Light Strip

AUZKIN 60 Inches Tailgate Light Bar Double Row LED Light Strip

AUZKIN 60 Inches Tailgate Light Bar Package Includes

  • 1 x Tailgate light strip ( with male 4-pin flat trailer connector & 40 inch cable)
  • 4 x Plastic bracket
  • 8 x Screws

* Female 4-pin flat trailer connector isn’t included


Double-Row LED and Waterproof IP67

Drive more safely with this powerful LED Tailgate light ! This 60 inches tailgate light is universal fitted for most Truck Pickup Trailers SUV RV VAN etc.

You can mount them along the tailgate as left/right turn signal lights, brake light, reverse light, running light and emergency strobe light.

NOTE: Usually RV or trucks etc has a 4-pin female connector, If your car doesn’t have the right one, we recommend you to buy a adapter.

  • Tips: If you don’t have similar installation experience, you can search “how to install tailgate light” on YouTube to get some help for your installation.

AUZKIN 60 Inches Tailgate Light Bar Double Row LED Light Strip




Additional information


Item Weight

5.9 ounces

Package Dimensions

8.35 x 6.93 x 0.98 inches


Is Discontinued By Manufacturer


Manufacturer Part Number

Tailgate light-320

Bulb Type




Date First Available

December 28, 2018

10 reviews for AUZKIN 60 Inches Tailgate Light Bar Double Row LED Light Strip Brake Running Turn Signal Reverse Tail Lights

  1. blank


    I got this for my husbands truck. He has a Ford F-150 with a Raptor body kit. He installed a light bar on his grill so I thought this would be cool for the back. It was easy to place and easy to hook up. Be sure to clean the area well before and let dry, we used vinegar and dried with a towel. We measured beforehand and marked our center point. We used the tape not the brackets and it hooks right to your trailer hookup. It works good and lets off good light.

  2. blank

    Thanh Nguyen

    I installed this by buying a 4 pin adapter to use with my 7 pin trailer light. It only cost $5-6 for one. I used the included adhesive that’s on the back of the led to mount it, and after I was happy with the placement, I drilled a few spot to mount the plastic holders. They’ve held up very well and they look great on my 2017 Honda Ridgeline. I like that they’re not too bright, but bright enough that it matches my normal lights. I don’t want to blind people when I press on the break, but I want to know when I am breaking so that they don’t rear end me. In florida with the amount of accidents we get, this will be a life saver!

  3. blank


    Works great and way better than paying double or triple for other lights. The plug and play option makes it easy but I decided to directly tap into wiring harness which took a little time but resulted in a cleaner look.Lights are bright and synced perfectly to blinker and hazard lights. Reverse lights are super bright and help when backing up.

  4. blank

    Robotica Industries

    I picked this up for my 98 Chevy s10. Im really impressed with it. I wired mine in direct but it comes with a plug that attaches to standard trailer wiring. I like how this one has a reverse light option as well. The LEDs are nice and bight and add a nice element of style and extra safety. I attached a pic of the bar with the brake lights on so you can see how bright it is. I did have to trim the end down to fit my smaller truck which was expected. Overall pretty happy with it

  5. blank

    B Jenkins

    This was a perfect fit for my 2006 F350. The installation is pretty straight forward, but let me detail how I installed it and it may help you too.1) Note the gap under your tailgate and plan where you want to install the light for best view2) Remove the tailgate3) Clean the paint, then wipe down with rubbing alcohol and let dry4) Stretch the tape out and see where your starting and end point will end up, and start with one end and work towards the other.5) DO NOT SLIDE YOUR FINGER ACROSS THE LIGHT!! It will tear the covering off the LEDS. Rather put it in as you work.If you want reverse to work, you need to tap into your reverse wiring. The easiest thing to do is find the plug for the 7 wire trailer connector and use it. It should be the center wire – use a butt splice with heat shrink, and make sure it’s sealed back up.All in all this is a nice addition. I’ve wanted one for years and figure it gives my old truck a bit of a modern feature. Plus the extra light at night helps!

  6. blank

    Jerry H

    Your browser does not support HTML5 video.

     Feels and looks like a quality piece. Easy to install and works great. Will keep an eye on the adhesive, but so far so good. Good product for the price.

  7. blank


    First off make sure to clean the mounting surface good. I missed some parts but luckily the adhesive is strong in all the areas that were clean. Lights are super bright even in daylight. The construction of the led strip seem really good. Like I said previously I like the adhesive it is very sticky so make sure you put it exactly where you want it. I like the 4 pin for ease of use but I am going to hardwire it in so I can also use the backup lights and still be able to use the 4 pin for my trailer. I recommend taking the tailgate off it makes the install easier. I think you cannot go wrong just from a being more visible because it definitely stands out.Side note if you plan on putting on a soft open tailgate, I would install this first.

  8. blank

    Derrick Williams

    Wanted something cool to mod my tacoma with. This tailgate light did the trick! It is one of those flexible, waterproof LED light strips you see all around, but it is programed and wired for emergency brakes, turn signals and brake lights (higher intensity). Wiring is very simple, you plug it into the 4pin connector of your tow plug of your vehicle and everything works. However, I wanted a cleaner look so I cut my plug and hardwired the wires to the back of the of my truck’s 4 pin plug by tapping them. This allows for me to use the 4 Pin connector when Im towing and gives it a cleaner look. Unfortunately nobody makes daisy chain connectors so if you want to hardwire these lights, you gotta hardwire it yourself. Also, they come with 3M body tape so you just stick it where ever you want. Super strong and wont fall off! Ill post some pics when I have time

  9. blank

    Henry Johnson

    Your browser does not support HTML5 video.

     Solid LED lights! Took about 30 minutes to hook it all up. Reverse light has to be snap locked to the tail light. VERY simple if you just google. Comes with plenty of slack to hide/secure wires. Very bright. Comes with screws to bolt to truck IF you want that extra security besides the 3M tape. As long as the LEDs hold up, I think it’s a solid buy.I’ve had it all hooked up for about 3 months and still working great.

  10. blank

    Galen T.

    Your browser does not support HTML5 video.

     Installed this on my 09 ford f150, it was pretty easy, plugs were a little difficult to get together but I got them together. Tapped into my reverse and ended up wrapping all the wires with electrical tape for extra security. But in general its a good product for less than $30, ill update if something happens after a while.

Only logged in customers who have purchased this product may leave a review.

You may also like…